CLIP SYSTEM | Sports flooring
The sports floor Clip System is a low profile, floating sports flooring system, designed for installations over all types of flat subfloors. This sports floor system is ideal for renovation projects, or when the finished floor height must be kept to an absolute minimum.
The 7/8" (22mm) solid hardwood floor boards are joined together with Junckers Steel Clips, which allow for unique independent floor board flexing. The floor floats over a 3/8" (10mm) performance foam underlay for maximum resilience.
Since there are no nails used in the Clip System, the floor system can be taken up and reinstalled elsewhere if ever needed.
Looking for specs and documentation? Download our specs below
Facts
PERFORMANCE |
Installed with 10mm SportsFoam; Area-elastic according to EN 14904 class A3 Installed with 15mm SportsFoam; Area-elastic according to FIBA, level 2 |
USE |
Smaller leisure centres Dance/fitness/aerobics/squash Refurbishment |
HARDWOOD TYPE |
Prefinished 7/8” (22 mm) 2-strip solid hardwood |
SYSTEM CONSTRUCTION |
Performance sport foam / steel clips |
UNDERLAYMENT |
3/8" (10mm) / 19/32" (15mm) Performance SportsFoam |
REQUIRED SUBFLOOR |
Flat |
TOTAL FLOOR SYSTEM THICKNESS |
1 1/4” (32 mm) |
SANDING AND REFINISHING |
Yes, 8-10 times to bare wood |
COMPATIBLE WITH RADIENT HEATING |
Yes |
SYSTEM COMPONENTS
1. 7/8" (22 mm) x 5" (129 mm) x 12’ (3700 mm) solid hardwood
2. Steel Clips
3. Junckers Performance Sports Foam
4. Polythene moisture barrier
5. Beech Sports Wall Base
|
|
GENERAL REQUIREMENTS EN 14904 |
REQUIREMENTS EN 14904:A3 |
TEST RESULTS* |
SHOCK ABSORPTION |
≥ 40 < 55 % |
≥ 40 < 55 % |
46 % |
VERTICAL DEFORMATION |
≥1.8 <3.5mm |
≥1.8 <3.5mm |
2.4 mm |
BALL BOUNCE |
≥ 90 % |
≥ 90 % |
98 % |
FRICTION |
≥ 80 ≤ 110 |
≥ 80 ≤ 110 |
~ 85 |
ROLLING LOAD |
≥ 1500 N |
≥ 1500 N |
2500 N1 |
POINT LOAD |
Ingen |
None |
4000 N ~ 400 kgs2 |
* 10mm SportsFoam
1) Junckers test with solid rubber wheels, width = 2” (50mm), diameter=4” (100mm).
2) Junckers test with 4” x 4” (100mm) point load.
SOLID HARDWOOD FLOORING CHOICES
A Junckers sports floor is made from 100% solid hardwood and will last for generations. Each plank is made from two rows of staves and is tongue and groove jointed on all four sides.
The floors are extremely stable and therefore minimizes challenges when humidity levels change through the year. We take far longer than normal over the drying process to ensure the movements that occur naturally in all wood is fully controlled and kept to a minimum. Our Beech sports floors are dried using Junckers unique press drying method. Our ash and maple sports floors are kiln dried.
Our floors are ready to use as soon as they are installed. This is because Junckers floors are sealed in the factory with our own produced hard wearing polyurethane.
All Junckers solid hardwood sports floors have the Danish Indoor Climate Certificate for low emissions of organic substances and can be delivered with either a FSC® or PEFC™ accreditation.
The installation process is always fast, easy and clean. Each prefinished plank is 12 foot long, and covers approximately 5 square feet.